Page 85 - Microsoft Word - 4236
P. 85

7.5 DIMENSIONS IN THE ASSEMBLY DRAWING

                  The followings dimensions are marked in the assembly drawing of an article:
                  1. Overall dimensions, which characterize height, length and width of an article or its the
                     greatest diameter. If one of these dimensions is changed after wards the shipment of
                     mobile parts, thus, dimensions in extreme positions of mobile parts are shown on the
                     drawing.
                  2. Fixing or assembly dimensions, necessary for correct connection of parts, located in direct
                     connection in an article.
                  3. Setting and conjunctive dimensions, which determine dimensions of elements, due to
                     them an article is installed or joined to another article.
                  4. Operating dimensions which show some calculation and structural descriptions of an
                     article.
                  The dimensions of separate parts or their elements are not shown in the assembly drawing.

                                           QUESTIONS FOR SELFCHECK

                     1. What is assembly drawing?
                     2. What must assembly drawing contain?
                     3. How making assembly drawing?
                     4. What are part numbers?
                     5. What dimensions we should put in the assembly drawing?






















































                                                                                                          85
   80   81   82   83   84   85   86   87   88   89   90