Page 29 - Microsoft Word - 4236
P. 29

Figure 2.24 – Denotation of sections











                                           Figure 2.25 – Denotation of sections

                  If a cutting plane passes through the ax of surface of rotation, limiting opening or deepening,
            the contour of opening or deepening is drawn fully.
                  If a cutting plane passes through the through unround opening and section turns out consisting
            of separate independent parts, it is necessary to use sectional drawings, but not sections.


                                              2.4 BEARING-OUT ELEMENTS

                  A bearing-out element is a depiction in the enlarged scale of a part of an object, which
            contains elements which are not on a basic depiction. Bearing-out elements are used, when auxiliary
            explanations are needed in regard to a form, sizes or other information (fig.2.26).























                                           Figure 2.26 – A bearing-out element

                  At the construction of bearing-out element the proper place of basic depiction is marked the
            continuous line and designate the capital letter of the Ukrainian alphabet on the shelf of line-
            bearing-out. Above a bearing-out element a record is done on a type A (5 : 1). In a fig. 2.26 the
            example of implementation of bearing-out element is resulted.









                                                                                                          29
   24   25   26   27   28   29   30   31   32   33   34